- Tech, OC'ing, SEO and more
- Hits: 9750
User Rating: 5 / 5
What is CPU Load Line Calibration?
CPU LLC adds extra voltage to compensate for Vdroop when a CPU or GPU is put under heavy load. LLC gives overclocking stability by preventing low or high voltage fluctuations and tries to maintain a stable voltage supply to the CPU or GPU. Higher LLC tends to overshoot more in voltage supply and a lower LLC tends to undershoot in the voltage supply to the CPU. A general rule of thumb is when using LLC settings to select 1 level below the maximum allowed by your motherboard vendor.
What is CPU Current Capability?
It is a threshold for the VRM to shutdown and monitors the current supply to the CPU, setting Current Capability higher will allow for more current supply to the CPU but will increase heat output. This works best if you have an overclock that shuts down the motherboard/PC because the threshold is triggered.
What is CPU VRM Switching Frequency?
Switching frequency is the transient response of your VRM MOSFETs settings this higher in Mhz will allow for a better transient response at the expense of increased heat output and using a lower setting in Mhz will lower the heat output but lower the transient response. Better transient response in overclocking translates into a more stable voltage supply from your PSU to the CPU.
What is CPU Power Duty Control?
This will allow for setting the current supply to the internal CPU voltage regulator at the expense of increased heat when set to extreme and lower heat when using optimized or standard. This will help with stability in overclocking and give the best result when using optimized or extreme.
What is CPU Power Phase Control?
This affects your VRM Power Phases to the CPU and will be depending on the setting, achieve greater stability in overclocking. Setting Power Phase Control to extreme keeps the number of active CPU power phases at the maximum. If you set Power Phase Control to optimized there will be a power-saving but less stability, phases to the CPU will power down.
What is CPU VRM Thermal Control?
This setting will impact the VRM based on temperatures and will throttle the CPU if the VRM gets too hot. To prevent throttling ensure you have airflow over the VRM heatsinks. Changing this setting to extreme allows for a greater thermal headroom when overlocking.
Ringbus or also referred to Ring Ratio is the internal CPU infrastructure that connects all the CPU cores, memory controller, system agent, IGPU, etc. Another naming convection is the uncore as in not the CPU core(s). Overclocking the Ringbus will result in a faster internal CPU data transfer but can lead to instability. An ideal Ringbus overclock is 1:1 with the CPU Core Ratio thus a 5.0Ghz(50.00 CPU Core Ratio). But in general, for stability, it is best to stay around 500Mhz of the Core Ratio. So a 5.0Ghz CPU overclock the Ringbus ideally should run at a Ringbus Ratio of 45(4.5Ghz). Ringbus OC is best served after overclocking your CPU and RAM for stability reasons. And the most gains will be in memory latency thus overclocking.
What is CPU Core/Cache Current Limit Max?
Sets the current limit for the CPU cores and Ringbus of an Intel CPU. This is to prevent throttling when overclocking thus only needs to be set when overclocking. Finding the maximum Current Limit simply enter 9999 and it will automatically set the max CPU Core/Cache Current Limit for you.
This value sets the time a CPU may run under load at the max possible boost frequency. When overclocking this value needs to be set at the highest possible value to maintain an overclock. This value is in watts and serves as a form of protection when overclocking. This value differs per CPU architecture and you can simply enter 9999 to automatically set the max Long Duration Package Power Limit.
This value is a time value in seconds that will impact how long a CPU can operate above TDP under load but below Long Duration Package Power Limit. Finding the maximum value simply enter 9999 and the highest possible value will be set automatically.
Sets a value in watts for the absolute highest power consumption for a short duration to compensate for Vdroop under extreme loads combined with LLC but is internal to the CPU whereas LLC is handled by the IC of the VRM. Settings this value to the maximum can easily be done by entering 9999 and it will automatically set the maximum value.
What is AVX?
AVX is an instruction set used for certain workloads like video encoding. This instruction set is much more demanding and will in the case of overclocking generate more heat. To prevent instability or thermal throttling an AVX offset might be applied through the BIOS. Normal AVX offset is -1 or -2 so if a CPU is overclocked to 5.0Ghz but runs an AVX workload is will downclock the CPU to 4.8Ghz with an AVX offset of -2.
What is BCLK Frequency?
This allows the base frequency of 100 to be adjusted through the BIOS. Changing the BCLK frequency impacts all domains(core & uncore) of the CPU and rarely needs adjustments.
What is CPU Core Ratio?
Cpu Core Ratio can on some motherboards be set per CPU core or synced on all CPU Cores. Sets the clock rate of your CPU by a factor of 10X. So a CPU Core Ratio of 50.00 will multiply the BCLK Frequency with a base value of 100 to 5,0Ghz.
What is CPU/Cache Voltage Override?
Sets the voltage for your CPU and Ringbus on a 1:1 ratio, depending on your motherboard you can either enter a manual value of an offset value. So a manual value of 1.4000 will set the CPU voltage to 1.4 volts using the manual setting.
What is CPU VCCIO Voltage?
This voltage primarily is used when overclocking DRAM. And regulates the rail to the IO receivers in an Intel CPU. Adjusting this voltage may help with stability when overclocking your Ringbus and DRAM. In some cases such as the only CPU overclocking with the RAM XMP profile, a lower voltage might be applied to lower the overall heat output of a CPU.
What is the CPU System Agent Voltage?
This voltage is mainly used for DRAM overclocking and regulates the IO between CPU cores and the uncore. This voltage can be adjusted when the CPU has a weaker memory controller then normal and using a high-speed DRAM kit to gain stability.
What is the CPU PLL Voltage?
PLL stands for Phase-Locked Loop and is the voltage control to the BCLK base clock, memory controller, bus clock and iGPU. These are different parts of the CPU and have their own frequencies. CPU PLLs voltage only needs to be changed is you change the BCLK clock speed or are using exotic cooling and running into the infamous Cold Bug.
What is DRAM Voltage?
Is the voltage supply to your RAM aka Memory sticks, increasing the DRAM voltage will allow your RAM to run at a higher frequency at times without changing the DRAM Timings but will increase heat output.
This sets the idle states of a CPU when it is not executing commands there a various C-States and serve as a power-saving function. For overclocking this should be turned off since you want maximum performance at the expense of increased power consumption and helps with keeping a stable overclock.
These are the most common questions and settings when overclocking an Intel-based system and served a supplement for current and upcoming overclocking guides for Intel-based systems. This FAQ is to supplement those guides and serve as a reference to more technical clarifications.
- Paul "HisEvilness" Ripmeester