- Hits: 23072
User Rating: 5 / 5
Lances & Mechs.
In this portion, I will cover various builds and lance setups to give you some inspiration for your playthrough in RogueTech. There will be a range of builds to cover all your needs but you, of course, iterate upon this and tinker on your builds. Also important to note here is that I only save up mechs that are the max tonnage in their weight class, so 35-ton parts for light mechs, 55-ton parts for medium mechs, 75-ton parts for heavy mechs and 100-ton mech parts for the assault mechs. For the end-game in RogueTech, I only use one medium lance, one heavy lance and two lances of assault mechs. Tonnage selection per class was merely based on the max amount of gear per mech class, so I was able to fit the max amount of equipment.
I only use an assault, and medium Mech for melee builds in my current lance setups since I switched to overcooking mechs so I can salvage more equipment and parts. Melee mechs are great for one strike killing mechs, but it tends to completely wreck one side torse/arm and leg doing so. Great for lower-tier missions that yield little to no useful salvage or higher tier assault missions for quick playthroughs. Below two screenshots of my Barbarian medium melee mech and my Berserker assault melee mech.
Barbarian(HCT-S7) Medium Melee Mech.
Berserker(BRZ-A3) Assault Melee Mech.
The big difference I emphasize the assault melee mech to have stealth so it will take less damage then the medium that has some more tanking function to it also the shield mod on this medium frame has an increased sensor signature penalty so adding stealth would make little sense. As well as adding chaff to reduce sensor and visual detection and flamers and T.S.E.M.P. to overheat and nerf damage output on my targets. Furthermore, I added mods to increase to walk and run distance so I can close in faster per turn, giving any hostile mech little to no chance of escaping.
These are speciality build mechs I use to gain more salvage per-mission by overheating a mech I want to salvage as a whole or in part. This centres around doing little to no damage to the Mech but overheating forcing a shutdown forced mech pilot ejection due to panic, or a called heat shot on a shutdown mech due to overheating. Stealth is added to avoid damage because brawlers tend to get flanked and shot in the back and on high-end missions that can result in a one-shot kill. I also added lance A.M.S. in the form of Advanced A.M.S. to reduce incoming L.R.M. damage for the whole lance as well to free up tonnage on the rest of the lance for increased performance. Below two screenshots of my Asura heavy mech cooker and Dire Star assault mech cooker.
Asura(MDG-X) Heavy Mech Cooker.
Dire Star(DS-Prime) Assault Mech Cooker.
Both builds are almost identical with the Asure being a very rare Solaris brawler and the Dire Star is a rare version of the Dire Wolf Omni mech the only downside to the Dire Star due to the fact it is an Omni mech it can not use the regular arm mods. The Omni pod will not work with P.P.C. type weapons like the T.S.E.M.P. Cannons, However, as an Omni mech, it will allow for more weapon tonnage to be added thus giving a far greater heat output. For the Asura, the weight restriction won't allow for 2 T.S.E.M.P. cannons to be fitted, but that is fixed by using a NARC Launcher(C) with beacons and haywire making it easier taking on medium and light mechs. The E.C.M. or cockpit mods will share sensor data through C3 functionality with the rest of the lance.
Long & Extreme Range Snipers.
Purpose build Mech for long to extreme ranges engagements due to the nature of the long to extreme range builds it is vital to have C3 networking make use of T.A.G. or NARC beacons for successful engagements. A downside to long to extreme range builds is that those weapons tend to be on the heavy side even when using AC/2 weapons but then you also run in the damage output issues as well as hit chance being lower at the extreme ranges. Another consideration to make is having the higher ground; however, when inserted into the low ground and having to fight uphill, you will have to close the distance to gain an acceptable hit %. None the less it is always wise to have at least one Mech in your lance to engage at long to extreme ranges even if it is to soften up targets while you close in below three screenshots of Gungnir heavy mech sniper, Kaiju assault mech sniper, Fafnir assault mech sniper.
Gungnir(MAD-S7) Heavy Sniper.
Kaiju(KGC-KJ) Assault Sniper.
Fafnir(FNR-5X) Assault Sniper.
Kaiju(KGC-KJ) Assault Sniper v2.
Kodiak(KDK-1) Assault Sniper.
These are five different builds where the Gungnir trades in range for long-range damage and is only slightly modified from the original Gungnir build and is a rare version of the Marauder heavy mechs. Whereas the Kaiju is a rare version of the King Crab and offers a lot of punch through the twin-linked P.P.C.'s and Large ER Pulse lasers but can close in and dual purpose as a brawler as well as an acid debuff through the mortar/2 important to note here that the Mortar is there purely for the Debuff and not damage output by itself. With recent changes, the Kaiju lost the ability to fit certain arms mode that would aid in sniping. As a result, the Kaiju is now only viable as a sniper with lasers and L.R.M.'s. The Kodiak can replace the role of the Kaiju with the same loadout while fielding the arm mods to balance Recoil. The Fafnir is built around extreme-range sniping with hyper-assault gauss rifles and two large E.R. laser too round of the damage. What is also very important is to use regular mechs that allow you to fit arms mods to gain accuracy and reduce Recoil this will greatly increase your hit % at long to extreme ranges. Since those mods are fitted on arms weapons should be fitted in the arms where possible with support weapons and ammo storage fitted in the side torsos.
This evolves around sacrificing some tonnage on a mech to fit the advanced A.M.S. system with plenty of ammo to reduce incoming missile damage allowing other mechs to use their tonnage towards other equipment. Only the Advanced A.M.S. system will intercept incoming fire at all friendlies there is a Pirate version of a laser A.M.S. that also allows for lance A.M.S., but it is tough to come by and has a relatively low intercept chance. These platforms are best suited for short to mid-range weapons I moved some of my lance A.M.S. to my cooker mechs and melee mechs however I retain one specialized build for lance A.M.S. due to the nature of the mech making is perfect for a lance A.M.S. build. Below one screenshot of my Kracken assault lance A.M.S.
Kracken(AS7-KR) Lance AMS.
A simple build centred around supporting the whole lance with A.M.S., a Command Console, and damage. The Atlas and variants due to the lack of weapon hardpoints are well suited for this role. As well as offering long to short-range weapons it is more than capable of taking on other assault mechs on its own.
These builds are for dealing damage and soaking up damage and are always better at close ranges since the heavier weapons only have a short-range and optimal range on most other damage dealing weapons is mid-range as well as being able to hit better at close range due to the hit %. They also are very well suited for sensor stealth builds with good E.C.M. suites making them harder to hit while being able to switch to ECCM to be able to hit better to counter E.C.M. Also to consider here is to use of AX SRM missiles or the A.X. mortars rounds from support builds that would increase there overall damage output even further. Below three screenshots of my Gladiator heavy damage brawler, Dire Wolf assault damage brawler and, Lone Wolf assault damage brawler.
Gladiator(BL-S7) Heavy Damage Brawler.
Dire Wolf(DW-B) Assault Damage Brawler.
Lone Wolf(DW-LP-AP) Assault Damage Brawler.
Timber Wolf(TW-D) Heavy Damage Brawler.
Timber Wolf(TW-H) Heavy Damage Brawler.
All five builds are centred around maximum damage while retaining full armour Omni mech are especially useful for this since they offer more tonnage for weapons while having more armour then let's say an Atlas. Since you do not have much in limb mods for Omni mechs you can use the Omnipod lower arm mod to gain some accuracy however this limits the use since no ballistic or P.P.C. weapons will fit in the Omni pods. The Gladiator is a reworked Black Knight as Solaris brawler and features special armour that increases the overall protection at double the weight and an internal structure mod that does not take up slot space while lowering the chassis weight as well as having an internal M.A.S.C. in the armour that can be turned on/off. Finally, the Gladiator does well over 300 damage and can even double as a long-range sniper with the RAC/2 weapons and arm mods. The Dire Wolf is an all-out laser build with some AX SRM's fitted to increase the damage output even further, and the damage is well over 600 without any buffs so it will crater any other assault mech it comes close. Due to the massive heat output, special armour and a special F.C.S. is fitted that helps with heat management. The Lone Wolf is a very rare Dire Wolf Omni mech that comes with special rotary gauss rifles I was unable to salvage more than 2, adding two more rotary gauss rifles and dropping some of the other weapons would be my preferred setup. But even now the build does well over 700 damage, and that is without any buff as well. It comes with a baked-in stealth armour and Nova CEWS ECM suite, special gauss F.C.S. and a Totem sensor suite. Both the Timber Wolves are to augment each other and field a 375 engine allowing them to close into optimal weapons range as well as flanking manoeuvres. The D variant was rebuilt to offer Long to Medium-range fire with about 345 damage output. In comparison, the H variant was designed around Medium to Short-range fire with about 374 damage output. Both use E.C.M. and Sensors with C3 networking through the Nova C.E.W.S. (C).
Light Mech Builds.
Many will start with light mechs with perhaps some medium mechs as well as some prefer a light and medium mech lance, so I decided to add some light mech builds. These are all made with the best components available at the time of writing this article. You can opt to work up to these builds or iterate upon them to suit your own needs. The light Mech builds below cover a wide range of capabilities and are best used in synergy within a lance since they do not offer the tonnage like heavier mechs to deal large amounts of damage. In general light mechs should be more operate as a wolf pack; therefore, they should supplement each other with damage, E.C.M. and C3 networking and spotting(TAG/NARC). Light mechs also tend to be very fragile when taking on heavy and assault mechs, so stealth armour is also a wise option to consider.
Raven(RVN-M) Stealth Light.
Wolf Hound(WLF-4WB) Damage Light.
Venom(SDR-9K) Flanker Light.
Fire Starter(FS-PM) Recon Light.
Fire Starter(FS9-S) Sniper Light.
A wide range of builds that can be switched out to complement each other or use a different light mech with similar hardpoints to fulfil the same role. The hardest part will be to crank out as much damage out of a light mech since so little tonnage is available hence why usually light Mech fulfil a support role and damage dealing is handled by heavier class mechs. However, some damage can be dished out but either requires pulse lasers and light P.P.C.'s with plenty of heatsinks or a long-range build but also is centred around lasers or P.P.C.'s with lowering the armour values to mount large lasers and ER PPC's. This Raven Stealth build is for visual, and sensor stealth making it an excellent spotter and comes with a baked-in E.C.M. and sensor suite. The NARC launcher is to mark targets for the rest of the lance or switch to its other support role and haywire and overheat a target. The Wolf Hound is a stealthy damage brawler with a mid to short-range, and this variant comes with a baked-in stealth armour and E.C.M. and sensor suite. The Venom is a highly mobile flanker that ideally get's behind a target and uses Ferro-Lammellor armour to get a damage reduction as well as a T.A.G. to support the rest of the lance. The Fire Starter Recon is similar to the Raven build above but also doubles as lance A.M.S. This build also features six flamers, stealth armour and a NARC/Haywire launcher to provide additional support to the rest of the lance. The Fire Starter Sniper is a variant that uses E.R. large and medium lasers to deal damage at a distance with a light mortar to provide an acid debuff to hostile mechs. The Ferro-Lammellor is to offset the lower armour values; it takes up equipment slots and not tonnage. All these builds, however, use C3 networking either through the Nova C.E.W.S. or Sensor Recon to share information to gain hit % to make every shot count. Lastly, all but one build feature jump jets for better positioning as well as the high ground offers an increased hit %.
Medium Mech builds.
Medium mechs could be used to early-game or late-game for specific mission types or farm mission for C-Bills and parts that have a low skull rating, therefore, have a lower payout and Assault or Heavy Mech would cost more then you would earn. Medium mechs will work best if you use a similar playstyle then Light mechs. The added bonus is more tonnage for more armour and weapons while being able to maintain a similar speed but more comfortable to detect.
Guerilla(BSW-S7) Damage Medium.
Storm Crow(SCR-G) Medium Flanker.
Storm Crow(SCR-Z) Medium Damage.
These three medium mech builds are all centred around dealing damage either moving in together directly or flanking. And they are then disengaging to pick off the next isolated target. The Guerilla is a rare variant of the Bushwacker with lostech and is stealthy to unload it full payload from almost point-blank range doing over 300 damage. It also fits some cluster mine munition to make short work of light mechs and their limbs. The ultra-rare RISC R/AC2 and Heavy MRM20 deal an immense amount of damage but only in close range. The ultra-rare RISC MML5 launcher fire both L.R.M. and S.R.M. munitions are giving you the option for variable range D.P.S. Both Storm Crows are built around D.P.S. while the G Variant is built around flanking with Ulta AC5's and jump jets. The Z Variant is built around A.T.M. launchers. Both Storm Crows use E.C.M. and Sensors with C3 networking through the Nova C.E.W.S. (S).